Knowledgebase

Connect a receipt printer and cash drawer

Plug the receipt printer into the store server PC, install it in Windows, plug the cash drawer into the printer and print a test from Print Settings. From then on the drawer opens by itself when a client pays cash, and the CASH DRAWER button opens it by hand.

Before you start

  • An 80 mm or 58 mm thermal receipt printer with its USB cable, and the Windows driver from the printer's maker.
  • A cash drawer made for receipt printers, with the cable that plugs into the printer.
  • The store server PC at the front desk, switched on and signed in to Windows, with EraPOS installed.
  • The owner's EraPOS password (or another full-access password): Print Settings asks for it.

Steps

  1. Connect the printer

    Plug the printer into the store server PC with its USB cable, load the paper roll and switch the printer on.

  2. Install it in Windows

    Install the driver that came with the printer (or from the maker's website). Check that the printer shows in Windows Settings under Printers & scanners, and make it the default printer. EraPOS prints to the printer set for your register and, when none is set, to the Windows default printer. If EraPOS support has set a printer name for your register, do not rename the printer in Windows.

  3. Turn on the paper cutter

    Some drivers come with the automatic cutter switched off, so receipts print but are never cut. Open the printer's properties in Windows and look for the cutter option. On Xprinter drivers it is called Cutter select: choose Report[Cut] so each receipt is cut at the end.

  4. Plug in the cash drawer

    Plug the drawer's cable into the drawer port on the back of the printer (often marked DK). The drawer never connects to the PC: EraPOS opens it through the printer.

  5. Open EraPOS from its own window

    Start EraPOS with EraPOS.exe on the store server PC. Printing and the drawer work from the EraPOS window. A register opened in a web browser tab cannot reach the printer: it shows Print failed! and the drawer stays shut.

  6. Print a test

    Tap MENU, then Administration > Print Settings, and enter the owner's password. Press Print test: the receipt you see in the preview prints. If it comes out too narrow or too wide, open Print Layout and pick your printer under Printer Model (Epson 80mm also covers HPRT, XPrinter and Volcora printers; Epson 58mm is for 58 mm paper).

  7. Test the drawer

    Open a ticket, go to the payment screen and press CASH DRAWER, or tap TASKS > Cash Drawer. The drawer should spring open. If the employee on the ticket is not allowed to open the drawer, EraPOS asks for the password of someone who is.

Result

Receipts print and cut cleanly, and the drawer opens on its own whenever a client pays cash (or with any other payment type that gives change, such as a check). Use CASH DRAWER when you need to open it without a sale, for example to make change. If something does not print, see The receipt printer is not printing.

Was this answer helpful?

Related Articles

Powered by WBAMS