What your salon needs to run EraPOS: a Windows PC at the front desk, a receipt printer and cash drawer, a card reader if you take cards, an Android tablet for check-in, phones for EraPOS Hub and a store network. Gather it before opening day, set it up, then test each piece.
Before: what to have
- A Windows PC at the front desk. It runs the store server and your first register; your sales data lives on it. EraPOS needs Microsoft Edge WebView2 Runtime on this PC for its window. The PC must stay on and signed in while the salon is open.
- More registers (optional). Other computers on your store network open EraPOS in a web browser and share the same tickets and customers.
- A receipt printer. An 80 mm or 58 mm thermal printer with a Windows driver, plugged into the store server PC by USB. If you would rather use a network printer, ask us first.
- A cash drawer that plugs into the receipt printer.
- A card reader (if you take cards). A Stripe Reader S700 or T600, or a Helcim Smart Terminal, and your own Stripe or Helcim account.
- A check-in tablet (optional). An Android tablet with Android 7 or newer for the EraPOS Check-in app. It can print a slip on a USB receipt printer of its own.
- Phones for EraPOS Hub. Your technicians and you use the app on an iPhone or an Android phone.
- A store network and internet. A router that connects the PC, the registers and the tablet. Card readers, online booking and EraPOS Hub also need the internet.
During: setting it up
- Start EraPOS on the store server PC and set it to start with Windows (see Set up the store server PC).
- Install the receipt printer in Windows, turn on its paper cutter and plug the drawer into it (see Connect a receipt printer and cash drawer).
- Connect each extra register to the store server once, with the connection kit.
- Pair the check-in tablet with the store (see Set up the check-in tablet).
- Have your card reader registered to its register with EraPOS support (see Card readers: how card payments work).
After: test every piece
- Press Print test in MENU > Administration > Print Settings, and check that the receipt is cut.
- Press CASH DRAWER on the payment screen and check that the drawer opens.
- Open EraPOS on each extra register and check that it shows the same Service Board.
- Check that the check-in tablet shows its welcome screen and that a test arrival reaches the waiting list.
- Take a small card payment on the reader, then void it so it goes back to the card.
Before you continue
Keep the store server PC switched on and signed in to Windows whenever the salon is open. The other registers and the check-in tablet work through it, so turning it off or signing out stops them too.
Result
Every device is in place and tested, and you are ready for the Opening day checklist. Not sure what to buy? Tell us about your front desk and we will help you choose.